GNSS - for the exact positioning of your vehicle

The following GNSS antennas are compatible to DTCO 4.0 Smart Tachograph system.

A2C59517070  GNSS-Antenna 3 meter cable length (magnetic / adhesive)
A2C59517075  GNSS-Antenna 2 meter cable length (magnetic / adhesive)

For more information, please contact your VDO partner.
http://vdo-partner.com/Vdo/index

GNSS technical data

In case the Smart Tachograph DTCO 4.0 is operated with other external GNSS antennas or GNSS splitters, which are not listed above, please ensure that these GNSS antennas or GNSS splitters connected to the tachograph fulfill the following system requirements:

 Parameter min typ max Unit Remarks
Phantom supply, short circuit current      55  mA  
Max. upper level for short circuit detection  39.5  42.3  45  mA  
Min. lower level for open circuit detection  1  4  7  mA  
Phantom voltage supply v.1  0      V  At I > 39.5 mA
Phantom voltage supply v.2  3.0      V  At I = 39.5 mA
Phantom voltage supply v.3    4.2    V  At I = 20 mA
Phantom voltage supply v.4      5.2  V  At I = 0 mA
Mandatory frequency range  1572.42    1578.42  MHz  GPS L1, Galileo E1B (OSNMA)
Recommended frequency Range  1568.42    1582.42  MHz  Galileo E1B
Optional frequency Range  1598.00    1605.40  MHz  GLONASS
Impedance    50    Ohm  
Antenna Voltage Standing Wave Ratio      1.2.1    Z0 = 50 Ohm
Antenna path amplification  16.00    25.00  dB  
Noise figure      2.50  dB  
Required isolation to other HF applications v.1  10      dB  
Required isolation to other HF applications v.2  20      dB  
Required isolation to other HF applications v.3  20      dB  

 

In any case, an authorized tachograph workshop needs to approve the proper funcionality of the GNSS antenna and if applicable, also the GNSS splitter according to the requirements of Annex IC (Reg. (EU)799/2016).

 

DSRC Antenna

The following DSRC antennas are compatible to DTCO 4.0 Smart Tachograph system.

AnC-number for ordering

Housing variant

Connector
FAKRA coding

Adhesive tape

A2C1943380021

Standard

L-coded Carmine Red

with

A3C0178410021

Flat

L-coded Carmine Red

without

 

For more information and customer specific antenna variants, please contact your VDO partner.
http://vdo-partner.com/Vdo/index

 

In any case, an authorized tachograph workshop needs to approve the proper functionality of the DSRC antenna according to the requirements of Annex IC (Reg. (EU)799/2016).

Follow us